Do this with all of the 4 strips until you obtain a rectangle. When you are done doing this on all of the strips, apply some glue on the cardboard layer at the end of the strip and attach another strip on it, perpendicularly. Carefully use a cutter to cut out that piece but make sure to leave the lowest layer of the cardboard intact. Measure your cardboard's thickness on one end of each strip and trace a line. 2 strips must be as long as the layers' longest side plus the size of your cardboard's thickness and the other 2 strips must be as long as the layer's short side plus your cardboard's thickness. To make the cardboard box, cut 4 large strips of cardboard with the same wideness: they must be wider than the tickness of your layers because you need to keep some free space on the back for the LED strip. Of course you can get an already made one of the right size, but I don't mind making my own! Now you need to protect the whole scenery inside a box. The reason why I cut the first half of the layer is because I wanted the moon to be bright, but later I figured that I could actually cut it out on that layer instead of the fourth one! The effect will be very soft and the outline of the reflection won't be as sharp and evident as it would be otherwise. The paper left in the third layer is going to hide the reflection at first but it will appear when the light is on. This is how it works: this layer will be placed behind the lake layer and in front of the last "upside down" layer. This is because I wanted the lowest half of my scenery to have a water reflection effect. Remember to work on this step on an old surface or something that you don't mind scratching!Īs you can see, my third layer is just a rectangle with one half missing (except for the frame) and no design. Take it slowly and be as accurate as possible.īe careful when you reach narrow joints in your design because they can easily break or be cut by mistake. As you do this, remove the parts that you don't need anymore. When you are done tracing the outline of your layers, start cutting them using a sharp x-acto knife. My third layer has a simple geometric shape so I simply drew it by free hand (see next step). To do this, I attached the printed layer on a window and placed the card stock on it so I could easily see and trace the outline of my scenery. When you are done with all of your layers, print them separately and transfer each of them on white card stock. In order to recognize them, I gave each layer a different color while I was working on them. Make sure to try all of your layers together as you make them because they need to perfectly fit with each other and all of their details are supposed to be visible (unless you don't want to) and not hidden somewhere behind another layer. Remember to include a frame of the same size around all of your layers so you can attach objects to it as well! For example: the last reindeer in my design is linked to the top of the bell tower the trees, the snowman and the deer are linked to the ground etc. One of the most important things in this kind of designs is making sure that there are no "flying" objects: all of your silhouettes must be attached somewhere in the scenery. I wanted my scenery to have 4 separate layers, with the last one being a water reflection effect (the upside down one). Since I am not that good at drawing, I chose the second option.Īfter I decided how I wanted my scenery to be, I looked for different silhouette images that suited my theme and composed each one of my layers using Adobe Photoshop. You can either draw it or design it with a computer and print it. The first thing you need to prepare is the design of the scenery you want for your shadow box.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |